mühendislik ile ilgili e booklar

gzkcy · 02-28-2009, 14:25

Product Description
Describing in detail how electrical power systems are planned and designed, this monograph illustrates the required structures of systems, substations and equipment using international standards and latest computer methods.
The book discusses the advantages and disadvantages of the different arrangements within switchyards and of the topologies of the power systems, describing methods to determine the main design parameters of cables, overhead lines, and transformers needed to realize the supply task, as well as the influence of environmental conditions on the design and the permissible loading of the equipment. Additionally, general requirements for protection schemes and the main schemes related to the various protection tasks are given.
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737
With its focus on the requirements and procedures of tendering and project contracting, this book enables the reader to adapt the basics of power systems and equipment design to special tasks and engineering projects.

From the Back Cover
Describing in detail how electrical power systems are planned and designed, this book illustrates the required structures of systems, substations and equipment using international standards and latest computer methods.

Advantages and disadvantages of the different arrangements within switchyards and of the topologies of the power systems are discussed, describing methods to determine the main design parameters of cables, overhead lines, and transformers needed to realize the supply task, as well as the influence of environmental condition son the design and the permissible loading of the equipment. Additionally, general requirements for protection schemes and the main schemes related to the various protection tasks are given.

With its focus on the requirements and procedures of tendering and project contracting, this book enables the reader to adapt the basics of power systems and equipment design to special tasks and engineering projects.

Product Details

* Hardcover: 349 pages
* Publisher: Wiley-VCH (August 11, 2008)
* Language: English
* ISBN-10: 3527407596
* ISBN-13: 978-3527407590[/b]
rapid download

-RebelFa1con · 02-28-2009, 14:27

Helal vwalla tüm sayfalar senın paylasımlarınla dolu

Tşkler

gzkcy · 03-02-2009, 08:55

Introduction to Fluid Mechanics

This successful book presents the fundamentals of fluid mechanics clearly and succinctly. Knowledge of fluid flow is essential to industries involving heat transfer, chemical processes, and aerodynamics. The book makes use of a problem-solving methodology and includes outstanding More... example problems. Topics covered are flow fields; potential theory and boundary layer theory; Bernoulli's Equation, Dimensional Analysis
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737

info:
book ınfo

RAPID DOWNLOAD

SOLUTION MANUAL DOWNLOAD RAPID

gzkcy · 03-03-2009, 16:28

James E. House, "Fundamentals of Quantum Chemistry, Second Edition (Complementary Science)"
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737
Academic Press | 291 pages | PDF

An introduction to the principles of quantum mechanics needed in physical chemistry. Mathematical tools are presented and developed as needed and only basic calculus, chemistry, and physics is assumed. Applications include atomic and molecular structure, spectroscopy, alpha decay, tunneling, and superconductivity. New edition includes sections on perturbation theory, orbital symmetry of diatomic molecules, the Huckel MO method and Woodward/Hoffman rules as well as a new chapter on SCF and Hartree-Fock methods.

This revised text clearly presents basic quantum mechanics for students in chemistry
Separate sections treat needed mathematical techniques. Presents complete mathematical details of derivations.
Contains applications of quantum mechanics to a broad range of problems in spectroscopy and molecular structure

New in this Edition:
A significant number of additional figures and improvements to existing figures
New exercises, plus answers for selected problems
Now includes the photoelectric effect, the perturbation treatment of the helium atom, orbital symmetry and chemical reactions, and molecular term symbols
Careful and extensive edits throughout the text improve clarity and correct minor errors

RAPID DOWNLOAD

gzkcy · 03-05-2009, 08:55

Electrical and Electronic Principles and Technology, Third Edition
By John Bird

* Publisher: Newnes
* Number Of Pages: 432
* Publication Date: 2007-10-01
* ISBN-10 / ASIN: 0750685565
* ISBN-13 / EAN: 9780750685566
* Binding: Paperback

Product Description:
In this book John Bird introduces electrical principles and technology through examples rather than theory - enabling students to develop a sound understanding of the principles needed by technicians in fields such as electrical engineering, electronics and telecommunications. No previous background in engineering is assumed, making this an ideal text for vocational courses at Level 2 and 3, foundation degree and introductory courses for undergraduates.

The book presents a logical topic progression rather than following the structure of a particular syllabus. However, the coverage of this new edition has been brought fully in line with the electrical and electronics units of the 2007 BTEC National specification. It is also designed to cover the requirements of the BTEC First specifications.

New material in this third edition includes brand new chapters on semiconductor diodes and transistors as well as added sections on batteries, fuel cells and alternative and renewable energies, relative and absolute voltages, self and mutual inductance, and virtual test and measuring instruments.
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737

Support material for tutors is available as a free download at SUPPORT MATERIAL SITE :

* Instructor's manual with full solutions and suggested marking scheme for all 7 revision tests in the book
* Solutions manual with worked solutions for about 400 of the further problems in the book
* Electronic files for all illustrations in the book

* New colour layout helps navigation and highlights key learning points, formulae and exercises
* 400 worked problems and over 1,300 questions, all with answers
* Fully up to date with the 2007 BTEC National specification
* Free lecturer support material available via textbooks.elsevier.com

MEDIAFIRE DOWNLOAD

gzkcy · 03-06-2009, 08:33

Computational Science and Its Applications - ICCSA 2008 - Part I

Product Description

The two-volume set LNCS 5072 and 5073 constitutes the refereed proceedings of the International Conference on Computational Science and Its Applications, ICCSA 2008, held in Perugia, Italy, in June/July, 2008.

The two volumes contain papers presenting a wealth of original research results in the field of computational science, from foundational issues in computer science and mathematics to advanced applications in virtually all sciences making use of computational techniques. The topics of the fully refereed papers are structured according to the five major conference themes: computational methods, algorithms and scientific applications, high performance technical computing and networks, advanced and emerging applications, geometric modelling, graphics and visualization, as well as information systems and information technologies.

Moreover, submissions from more than 20 workshops and technical sessions in the areas, such as embedded systems, geographical analysis, computational geometry, computational geomatics, computer graphics, virtual reality, computer modeling, computer algebra, mobile communications, wireless networks, computational forensics, data storage, information security, web learning, software engineering, computational intelligence, digital security, biometrics, molecular structures, material design, ubiquitous computing, symbolic computations, web systems and intelligence, and e-education contribute to this publication.
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737

rapid part 1

rapid part 2

Computational Science and Its Applications - ICCSA 2008 - Part II

Product Description

The two-volume set LNCS 5072 and 5073 constitutes the refereed proceedings of the International Conference on Computational Science and Its Applications, ICCSA 2008, held in Perugia, Italy in June/July 2008.

The two volumes contain papers presenting a wealth of original research results in the field of computational science, from foundational issues in computer science and mathematics to advanced applications in virtually all sciences making use of computational techniques. The topics of the refereed papers are structured according to the five major conference themes: computational methods, algorithms and applications, high performance technical computing and networks, advanced and emerging applications, geometric modelling, graphics and visualization, information systems and information technologies.

rapid download

password:netbks.com boşluğu imleçle geçiniz

mu_tu · 03-06-2009, 15:12

hocam ellerine sağlık çok güzel çalışma olmuş

gzkcy · 03-11-2009, 08:42

Environmental Pollution and Control, Fourth Edition
by J. Jeffrey Peirce, P Aarne Vesilind, Ruth Weiner,

ISBN-10 / ASIN: 0750698993

ISBN-13 / EAN: 9780750698993

Publisher: Butterworth-Heinemann

Number Of Pages: 392

Publication Date: 1997-11-11

Complex environmental problems are often reduced to an inappropriate level of simplicity. While this book does not seek to present a comprehensive scientific and technical coverage of all aspects of the subject matter, it makes the issues, ideas, and language of environmental engineering accessible and understandable to the nontechnical reader.Improvements introduced in the fourth edition include a complete rewrite of the chapters dealing with risk assessment and ethics, the introduction of new theories of radiation damage, inclusion of environmental disasters like Chernobyl and Bhopal, and general updating of all the content, specifically that on radioactive waste. Since this book was first published in 1972, several generations of students have become environmentally aware and conscious of their responsibilities to the planet earth. Many of these environmental pioneers are now teaching in colleges and universities, and have in their classes students with the same sense of dedication and resolve that they themselves brought to the discipline. In those days, it was sometimes difficult to explain what indeed environmental science or engineering was, and why the development of these fields was so important to the future of the earth and to human civilization. Today there is no question that the human species has the capability of destroying its collective home, and that we have indeed taken major steps toward doing exactly that.And yet, while, a lot has changed in a generation, much has not. We still have air pollution; we still contaminate our water supplies; we still dispose of hazardous materials improperly; we still destroy natural habitats as if no other species mattered. And worst of all, we still continue to populate the earth at an alarming rate. There is still a need for this book, and for the college and university courses that use it as a text, and perhaps this need is more acute now than it was several decades ago. Although the battle to preserve the environment is still raging, some of the rules have changed. We now must take into account risk to humans, and be able to manipulate concepts of risk management. With increasing population, and fewer alternatives to waste disposal, this problem is intensified. Environmental laws have changed, and will no doubt continue to evolve. Attitudes toward the environment are often couched in what has become known as the environmental ethic. Finally, the environmental movement has become powerful politically, and environmentalism can be made to serve a political agenda.In revising this book, we have attempted to incorporate the evolving nature of environmental sciences and engineering by adding chapters as necessary and eliminating material that is less germane to today's students. We have nevertheless maintained the essential feature of this book -- to package the more important aspects of environmental engineering science and technology in an organized manner and present this mainly technical material to a nonengineering audience.This book has been used as a text in courses which require no prerequisites, although a high school knowledge of chemistry is important. A knowledge of college level algebra is also useful, but calculus is not required for the understanding of the technical and scientific concepts.We do not intend for this book to be scientifically and technically complete. In fact, many complex environmental problems have been simplified to the threshold of pain for many engineers and scientists. Our objective, however, is not to impress nontechnical students with the rigors and complexities of pollution control technology but rather to make some of the language and ideas of environmental engineering and science more understandable.PAVJJPRFWAn introduction to the more important aspects of environmental science and technology.Well organized and suitable for both the technical and non-technical reader.Ideal for the student taking courses in this field who does not have an extensive engineering, mathematical, or environmental background.
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737

mihd download

gzkcy · 03-12-2009, 09:20

Review
a good, solid instructional text on the basic tools of numerical analysis.
-AIAA Journal

This text is designed for a junior-senior level elective course taken by a large number of engineering students from Mechanical, Civil and Electrical Engineering. The objective of the book is to introduce the engineer and scientist to numerical methods that can be used to solve the equations that govern physical processes.

Product Details
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737

* Hardcover: 840 pages
* Publisher: CRC; 2 edition (May 31, 2001)
* Language: English
* ISBN-10: 0824704436
* ISBN-13: 978-0824704438

download uploading

gzkcy · 04-02-2009, 08:39

Fundamentals of Thermodynamics and Applications: With Historical Annotations and Many Citations from Avogadro to Zermelo

Product Description

The book provides a systematic introduction into the fundamental ideas of thermodynamics at a somewhat advanced level. And it exhibits many applications of the theory in the fields of engineering, physics, chemistry, physical chemistry, and materials science. The universal equations of balance are strictly separated from the constitutive equations which characterize the behavior of material bodies, mostly gases, vapors, and liquids. Some selected solids like rubber, gels and shape memory alloys are considered as well.
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737

Both authors have taught students of the subject for many years at the Technical University of Berlin, and they have actively participated in modern research in thermodynamics.

Historical annotations offer some relaxing moments for the reader.

rapid download

Password: netbks.com

gzkcy · 04-06-2009, 16:51

500+ Electrical Engineering E-Books Mega Collection

Total Folder Size: 3GB+
Files: 499
File Size Range: 50KB - 50MB

easy share folder

Contents:

1580533523._20-_20.Artech-Technology.Trends.in.Wireless.Communications.rar
1580533558._20-_20.Artech-********.Management.and.Routing.in.Mobile.Wireless .Networks.rar
A.Primer.on.Asynchronous.Modem.Communication.rar
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737
_5bT.270s_5dJohnson.D.H._.Wise.J.D..Fundamentals.o f.electrical.engineering.1999.rar
802.11.Security.rar
0201760347.Wireless.Security._20__20.Privacy._20-_20.Best.Practices.and.Design.Techniques.rar
158053371X._20-_20.Artech-TDD-CDMA.for.Wireless.Communications.rar
1580533167._20-_20.Artech-Interference.Analysis.and.Reduction.for.Wireless.S ystems.rar
A.First.Course.in.Corporate.Finance.rar
_Delmar__20Modern_20Control_20Technology--Components_20__20Systems_20_2nd_20Ed._.rar
A.User_27s.Guide.to.Aspect.Ratio.Conversion.rar
Abstract.Harmonic.Analysis.of.Continuous.Wavelet.T ransforms.rar
3G.Handset._20__20.Network.Design._20-_20.Wiley._.Sons.rar
Adaptive.Digital.Filters.Second.Edition.rar
Advanced.Techniques.in.RF.Power.Amplifier.Design.r ar
Adaptive_20Control_20Systems.rar
A.wavelet.tour.of.signal.processing.Mallat.S..draf t_.2005.MNw.rar
Advanced.Wired.and.Wireless.Networks.Springer.eBoo k._20-_20.YYePG.rar
Advances.in.Mobile.Radio.Access.Networks.Artech.Ho use.Publishers.Jun.2005.eBook._20-_20.LinG.rar
Aerials.rar.rar
Adaptive.Image.Processing.A.Computational.Intellig ence.Perspective.rar
Advanced.Digital.Signal.Processing.and.Noise.Reduc tion.2nd.Edition.rar
Advanced_20Control_20Engineering.rar
An.Introduction.to.Pattern.Recognition._20-_20.Michael.Alder.rar
A.First.Lab.in.Circuits.and.Electronics.rar
An.Introduction.To.Statistical.Signal.Processing.r ar
Algorithms.For.Communication.Systems.And.Their.App lications.rar
Analog.Circuits.Cookbook.rar
Analog.BiCMOS.Design.Practices.and.Pitfalls.rar
Advances.in.Fingerprint.Technology.Second.Edition. eBook._20-_20.EEn.rar
Analog.and.Digital.Circuits.for.Electronic.Control .System.Applications..rar
Alternative.Breast.Imaging.Kluwer.Academic.Publish ers.eBook._20-_20.LinG.rar
Analysis_20and_20Design_20of_20Integrated_20Circui t-Antenna_20Modules.rar
An_20Introduction_20to_20the_20Theory_20of_20Micro wave_20Circuits_20_Kurokawa_.rar
Antenna_20Arraying_20Techniques_20In_20The_20Deep_ 20Space_20Network.rar
Application.of.Programmable.DSPs.in.Mobile.Communi cations.2002.rar
.
.
.

içindekilerin devamını word dosyası olarak ekledim

gzkcy · 04-10-2009, 13:58

Design Sketching is an innovative new
sketch technique book that has become a highly regarded resource for designers, students and Universities throughout the world.

Rather than taking the traditional theoretical approach, it aims to teach and inspire by displaying a broad collection of sketches encompassing the entire design process.
Twenty-four talented students from the Umeå Institute of Design, one of Europe’s best design schools, have contributed to the diverse material in the book. Work has been selected from the different areas of the Institute, resulting in a unique collection of sketches representing a large number of different product designs.

We hope and believe that Design Sketching will help you to develop your sketching skills and serve as an invaluable tool for inspiration!

rapid download

gzkcy · 04-29-2009, 17:06

Mechanical and Materials Collection 2 CDs
ISO | 737.8 MB/744.MB | 5% recovery

This is book set

CD1

ALCOCK, C. B. (2000). Thermochemical Processes - Principles and Models Thermochemical_Processes.pdf 2021046
ASHBY, M. F. (1998). Engineering Materials (2nd ed.) (2 vols.)/Volume 1 - An Introduction to their Properties and Applications Engineering_Materials_2E_VOLUME1.pdf 13852322
ASHBY, M. F. (1998). Engineering Materials (2nd ed.) (2 vols.)/Volume 2 - An Introduction to Microstructures, Processing and Design Engineering_Materials_2E_VOLUME2.pdf 12052918
ASHBY, M. F. (2000). Metal Foams - A Design Guide Metal_Foams.pdf 4331242
BACHUS, L. (2003). Know and Understand Centrifugal Pumps Know_and_Understand_Centrifugal_Pumps.pdf 8129200
BAI, Y. (2003). Marine Structural Design Marine_Structural_Design.pdf 14776644
BAKER, A. A. (2002). Advances in the Bonded Composite Repair of Metallic Aircraft Structure (2 vols.) Advances_Repair_Metallic_Aircraft_Structure_VOLUME 1.pdf 14745230
BAKER, A. A. (2002). Advances in the Bonded Composite Repair of Metallic Aircraft Structure (2 vols.) Advances_Repair_Metallic_Aircraft_Structure_VOLUME 2.pdf 15016258
BERTRAM, V. (2000). Practical Ship Hydrodynamics Practical_Ship_Hydrodynamics.pdf 2307142
BIRD, J. (2003). Engineering Mathematics (4th ed.) Engineering_Mathematics_4E.pdf 4949257
BLAZEK, J. (2001). Computational Fluid Dynamics - Principles and Applications BLAZEK_Computational_Fluid_Dynamics.pdf 12006916
BLOCH, H. P. (1990). Machinery Component Maintenance and Repair (2nd ed.) Machinery_Component_Maintenance_2E.pdf 14707675
BLOCH, H. P. (1996). Major Process Equipment Maintenance and Repair (2nd ed.) Practical_Machinery_Management_2E.pdf 20282256
BLOCH, H. P. (1998). Improving Machinery Reliability (3rd ed.) Improving_Machinery_Reliability_3E.pdf 20008299
BONNICK, A. W. M. (2001). Automotive Computer Controlled Systems - Diagnostic Tools and Techniques Automotive_Computer_Controlled_Systems.pdf 7054772
BOOKER, J. D. (2001). Designing Capable and Reliable Products Designing_Capable_and_Reliable_Products.pdf 18430414
BOYCE, M. P. (2001). Gas Turbine Engineering Handbook (2nd ed.) Gas_Turbine_Engineering_Handbook_2E.pdf 10845891
BRAMWELL, A. R. S. (2001). Bramwell's Helicopter Dynamics (2nd ed.) BRAMWELL_Helicopter_Dynamics_2E.pdf 5722593
BRANDES, E. A. (1992). Smithells Metals Reference Book (7th ed.) Smithells_Metals_Reference_Book_7E.rar 29964954
BRANDES, E. A. (1998). Smithells Light Metals Handbook Smithells_Light_Metals_Handbook.pdf 1850070
BROWN, J. R. (1999). Foseco Non-Ferrous Foundryman's Handbook (11th ed.) Foseco_Non-Ferrous_Foundryman's_Handbook_11E.pdf 8078126
BROWN, J. R. (2000). Foseco Ferrous Foundryman's Handbook Foseco_Ferrous_Foundryman's_Handbook.pdf 4353593
BRUNDLE, C. R. (1992). Encyclopedia of Materials Characterization - Surfaces, Interfaces, Thin Films Encyclopedia_of_Materials_Characterization.pdf 20452194
BRYDSON, J. A. (1999). Plastics Materials (7th ed.) Plastics_Materials_7E.pdf 50312959
BURCHELL, T. D. (1999). Carbon Materials for Advanced Technologies Carbon_Materials_for_Advanced_Technologies.pdf 14734488
BUTLER, D. (2000). Guide to Ship Repair Estimates - In Man-Hours Guide_to_Ship_Repair_Estimates.pdf 1063141
CAHN, R. W. (1996). Physical Metallurgy (4th ed.) (3 vols.) Physical_Metallurgy_4E_VOLUME1.rar 20107355
CAHN, R. W. (1996). Physical Metallurgy (4th ed.) (3 vols.) Physical_Metallurgy_4E_VOLUME2.rar 19030323
CAHN, R. W. (1996). Physical Metallurgy (4th ed.) (3 vols.) Physical_Metallurgy_4E_VOLUME3.rar 20635291
CAHN, R. W. (2001). The Coming of Materials Science The_Coming_of_Materials_Science.pdf 14712795
CAMPBELL, B. A. (1996). Introduction to Space Sciences and Spacecraft Applications Intro_to_Space_Sciences_Spacecraft_Applications.pd f 5837763
CAMPBELL, J. (2003). Castings - The New Metallurgy of Cast Metals (2nd ed.) Castings_2E.pdf 12156641
CARPINTERI, A. (2003). Biaxial-Multiaxial Fatigue and Fracture Biaxial_Multiaxial_Fatigue_and_Fracture.pdf 14766468
CARSON, P. (2002). Hazardous Chemicals Handbook (2nd ed.) Hazardous_Chemicals_Handbook_2E.pdf 2530016
CARVILL, J. (1993). Mechanical Engineer's Data Handbook Mechanical_Engineers_Data_Handbook.pdf 14979729
CHILDS, T. (2000). Metal Machining - Theory and Applications Metal_Machining.pdf 2975032
~censored~, A. N. (2004). A Guide to the Collision Avoidance Rules (6th ed.) Collision_Avoidance_Rules_Guide_6E.pdf 4969171
CRAWFORD, R. J. (1998). Plastics Engineering (3rd ed.) Plastics_Engineering_3E.pdf 23049366
DERRETT, D. R. (1999). Ship Stability for Masters and Mates (5th ed.) Ship_Stability_for_Masters_and_Mates_5E.pdf 5976671
DIXON, S. L. (1998). Fluid Mechanics, Thermodynamics of Turbomachinery (4th ed.) Fluid_Mechanics_and_Thermodynamics_of_Turbomachine ry_4E.pdf 3367533
ELICES M. (2002). Fiber Fracture Fiber_Fracture.pdf 11396610
ENDO, M. (1996). Carbon Nanotubes Carbon_Nanotubes.pdf 8382525
EYRES, D. J. (2001). Ship Construction (5th ed.) Ship_Construction_5E.pdf 17982652
GARRETT, T. K. (2001). The Motor Vehicle (13th ed.) The_Motor_Vehicle_13E.pdf 19879099
HALEVI, G. (2001). Handbook of Production Management Methods Handbook_of_Production_Management_Methods.pdf 17105954
HEISLER, H. (2002). Advanced Vehicle Technology (2nd ed.) Advanced_Vehicle_Technology_2E.pdf 8760476
HODKINSON, R. (2001). Lightweight Electric Hybrid Vehicle Design Lightweight_Electric_Hybrid_Vehicle_Design.pdf 8878614
HORLOCK, J. H. (2003). Advanced Gas Turbine Cycles Advanced_Gas_Turbine_Cycles.pdf 5285134
HOUGHTON, E. L. (2002). Aerodynamics for Engineering Students (5th ed.) Aerodynamics_for_Engineering_Students_5E.pdf 16575685
HOUSE, D. J. (2001). Seamanship Techniques (2nd ed.) Seamanship_Techniques_2E.pdf 22475254
HOYLE, D. (2000). Automotive Quality Systems Handbook Automotive_Quality_Systems_Handbook.pdf 2948822
HOYLE, D. (2001). ISO 9000 Quality Systems Handbook (4th ed.) ISO_9000_Quality_Systems_Handbook_4E.pdf 3379509
HOYLE, D. (2003). ISO 9000_ 2000 - An A-Z Guide ISO_9000'2000_An_A-Z_Guide.pdf 1134100
HUDSON, J. A. (2000). Engineering Rock Mechanics (2 vols.)/Part 1 - An Introduction to the Principles Engineering_Rock_Mechanics_VOLUME1.pdf 12221480
HUDSON, J. A. (2000). Engineering Rock Mechanics (2 vols.)/Part 2 - Illustrative Worked Examples Engineering_Rock_Mechanics_VOLUME2.pdf 14811234
JENKINSON, L. R. (2003). Aircraft Design Projects for Engineering Students Aircraft_Design_Projects.pdf 2556382
JONES, D. R. H. (2001). Failure Analysis Case Studies II Failure_Analysis_Case_Studies_II.pdf 12783039
JUDD, S. (2003). Membranes for Industrial Wastewater Recovery and Re-Use Membranes_for_Industrial_Wastewater_Recovery.pdf 8829837
KIM, J.-K. (1998). Engineered Interfaces in Fiber Reinforced Composites Engineered_Interfaces_in_Fiber_Reinforced_Composit es.pdf 11007783
KING, R. P. (2002). Introduction to Practical Fluid Flow Intro_to_Practical_Fluid_Flow.pdf 4082998
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737
KUNDU, P. K. (2001). Fluid Mechanics (2nd ed.) KUNDU_Fluid_Mechanics_2E.pdf 29839448

CD 2

LAI, W. M. (1993). Introduction to Continuum Mechanics (3rd ed.)
LESTER, A. (2003). Project Planning and Control (4th ed.)
LIENGME, B. V. (2002). A Guide to Microsoft Excel 2002 for Scientists and Engineers (3rd ed.)
Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737
MARCINIAK, Z. (2002). Mechanics of Sheet Metal Forming (2nd ed.)
MARGHITU, D. B. (2001). Mechanical Engineer's Handbook
MATTHEWS, C. (2001). Aeronautical Engineer's Data Book
MCFARLANE, B. (2002). Beginning AutoCAD 2002
MCFARLANE, B. (2002). Modelling with AutoCAD 2002
MCGEORGE, H. D. (1995). Marine Auxiliary Machinery (7th ed.)
MEGSON, T. H. G. (1999). Aircraft Structures for Engineering Students (3rd ed.)
MERCER, R. B. (2001). Industrial Control Wiring Guide (2nd ed.)
MOBLEY, R. K. (1999). Root Cause Failure Analysis
MOBLEY, R. K. (1999). Vibration Fundamentals
MOBLEY, R. K. (2002). An Introduction to Predictive Maintenance (2nd ed.)
MOBLEY, R. K. (2003). Plant Engineering Handbook
MOMBER, A. W. (2002). Hydroblasting and Coating of Steel Structures
MURAKAMI, Y. (2002). Metal Fatigue - Effects of Small Defects and Nonmetallic Inclusions
NEALE, M. J. (1995). The Tribology Handbook (2nd ed.)
OAKLAND, J. S. (2003). Statistical Process Control (5th ed.)
OHRING, M. (1991). The Materials Science of Thin Films
PACEJKA, H. B. (2002). Tyre Mechanics and Vehicle Dynamics
PAIDOUSSIS, M. P. (1998). Fluid-Structure Interactions - Slender Structures and Axial Flow (vol. 1)
POPE, J. E. (1996). Rules of Thumb for Mechanical Engineers
RAWSON, K. J. (2001). Basic Ship Theory (5th ed.) (2 vols.)
REIMPELL, J. (2001). The Automotive Chassis - Engineering Principles (2nd ed.)
RIBBENS, W. B. (1997). Understanding Automotive Electronics (5th ed.)
RIDLEY, J. (2002). Safety at Work (6th ed.)
ROSATO, D. V. (2003). Plastics Engineered Product Design
SANDLER, B.-Z. (1999). Robotics - Designing the Mechanisms for Automated Machinery (2nd ed.)
SCHNEEKLUTH, H. (1998). Ship Design for Efficiency and Economy (2nd ed.)
SIDERIS, M. (1998). Methods for Monitoring and Diagnosing the Efficiency of Catalytic Converters
SMALLMAN, R. E. (1999). Modern Physical Metallurgy and Materials Engineering - Science, Process, Application
SMITH, D. J. (2001). Reliability, Maintainability and Risk - Practical Methods for Engineers (6th ed.)
SMITH, E. H. (1994). Mechanical Engineer's Reference Book (12th ed.)
STACHOWIAK, G. W. (2000). Engineering Tribology (2nd ed.)
STOLARSKI, T. A. (1990). Tribology in Machine Design
TANAKA, K. (1999). The Science and Technology of Carbon Nanotubes
TETLEY, L. (2001). Electronic Navigation Systems (3rd ed.)
TONG, L. (2002). 3D Fibre Reinforced Polymer Composites
TROTT, A. R. (2000). Refrigeration and Air-Conditioning (3rd ed.)
TUPPER, E. C. (1996). Introduction to Naval Architecture (3rd ed.)
VASILIEV, V. V. (2001). Mechanics and Analysis of Composite Materials
WATSON, D. G. M. (1998). Practical Ship Design
WILLMOTT, P. (2001). TPM - A Route to World-Class Performance
WOODYARD, D. F. (2004). Pounder's Marine Diesel Engines and Gas Turbines (8th ed.)
WU, Y.-S. (2001). Practical Design of Ships and Other Floating Structures (vol. 1)
YASUDA, E. (2003). Carbon Alloys - Novel Concepts to Develop Carbon Science and Technology
YUN, L. (2000). Theory and Design of Air Cushion Craft
ZIENKIEWICZ, O. C. (2000). The Finite Element Method (5th ed.) (3 vols.)

FILEFACTORY PART 1
FILEFACTORY PART 2
FILEFACTORY PART 3
FILEFACTORY PART 4
FILEFACTORY PART 5
FILEFACTORY PART 6
FILEFACTORY PART 7
FILEFACTORY PART 8
FILEFACTORY PART 9
FILEFACTORY PART 10
FILEFACTORY PART 11
FILEFACTORY PART 12

ılgarhan · 05-12-2009, 20:37

civil engineering e book collection linklerini yenileyebilir misiniz?

gzkcy · 05-13-2009, 09:05

Alıntı:

Orjinal Mesaj Sahibi ılgarhan

civil engineering e book collection linklerini yenileyebilir misiniz?

KİTAPLARI YENİDEN YÜKLEYEBİLİRİM AMA BİRAZ ZAMAN ALIR. EĞER İSTEDİĞİN BELLİ KİTAPLAR VARSA ONLARI SÖYLE DAHA HIZLI OLUR.

aşağıdaki rapid folder da inş. müh. kitapları var oraya da göz atabilirsin.

RAPID FOLDER

GİRİŞ İÇİN PASSWORD: www.insaatmuhendisligi.net BOŞLUĞU İMLEÇLE GEÇİNİZ

02-28-2009, 14:25	#421
gzkcy Forum Kalfası Kayıt Tarihi: Mar 2007 Üye numarası: #112559 Yer: ankara Mesaj sayısı: 1,316 Karma etkisi: 6532 Karma: 652719	Power System Engineering Product Description Describing in detail how electrical power systems are planned and designed, this monograph illustrates the required structures of systems, substations and equipment using international standards and latest computer methods. The book discusses the advantages and disadvantages of the different arrangements within switchyards and of the topologies of the power systems, describing methods to determine the main design parameters of cables, overhead lines, and transformers needed to realize the supply task, as well as the influence of environmental conditions on the design and the permissible loading of the equipment. Additionally, general requirements for protection schemes and the main schemes related to the various protection tasks are given. Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 With its focus on the requirements and procedures of tendering and project contracting, this book enables the reader to adapt the basics of power systems and equipment design to special tasks and engineering projects. From the Back Cover Describing in detail how electrical power systems are planned and designed, this book illustrates the required structures of systems, substations and equipment using international standards and latest computer methods. Advantages and disadvantages of the different arrangements within switchyards and of the topologies of the power systems are discussed, describing methods to determine the main design parameters of cables, overhead lines, and transformers needed to realize the supply task, as well as the influence of environmental condition son the design and the permissible loading of the equipment. Additionally, general requirements for protection schemes and the main schemes related to the various protection tasks are given. With its focus on the requirements and procedures of tendering and project contracting, this book enables the reader to adapt the basics of power systems and equipment design to special tasks and engineering projects. Product Details * Hardcover: 349 pages * Publisher: Wiley-VCH (August 11, 2008) * Language: English * ISBN-10: 3527407596 * ISBN-13: 978-3527407590[/b] rapid download __________________ Dünyada her millet icraatına tahammül ettiği hükümetin mesuliyetine ortak sayılır. Mustafa Kemal ATATÜRK Asalet bir altin idi pul oldu, Turlu turlu bedenlere cul oldu, İmanin yolu keseden geceli, Kimi pula, kimi kula kul oldu Kim biliyor ilim ilen irfani Hamiyeti vicdani vatani Endamin guzel kesen doluysa Sensin herkeslerin beyi sultani

02-28-2009, 14:27	#422
-RebelFa1con Forum Ustası Kayıt Tarihi: Feb 2009 Üye numarası: #312953 Yer: GMG Garage Mesaj sayısı: 4,551 Karma etkisi: 25870 Karma: 2586448	Helal vwalla tüm sayfalar senın paylasımlarınla dolu Tşkler __________________ Gördüğünüz Araçların Hepsi, KPMF 3M Ve Oracle Markalı Folyolar ile GMG Garage farkıyla Kaplanmıştır! Eğer Sizde Aracınızı Kaplatmak istiyorsanız, Bizimle İletişim'e Geçin ~ iletişim : RebelFa1con

03-02-2009, 08:55	#423
gzkcy Forum Kalfası Kayıt Tarihi: Mar 2007 Üye numarası: #112559 Yer: ankara Mesaj sayısı: 1,316 Karma etkisi: 6532 Karma: 652719	Introduction to Fluid Mechanics by Robert W. Fox Alan T. McD Introduction to Fluid Mechanics This successful book presents the fundamentals of fluid mechanics clearly and succinctly. Knowledge of fluid flow is essential to industries involving heat transfer, chemical processes, and aerodynamics. The book makes use of a problem-solving methodology and includes outstanding More... example problems. Topics covered are flow fields; potential theory and boundary layer theory; Bernoulli's Equation, Dimensional Analysis Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 info: book ınfo RAPID DOWNLOAD SOLUTION MANUAL DOWNLOAD RAPID __________________ Dünyada her millet icraatına tahammül ettiği hükümetin mesuliyetine ortak sayılır. Mustafa Kemal ATATÜRK Asalet bir altin idi pul oldu, Turlu turlu bedenlere cul oldu, İmanin yolu keseden geceli, Kimi pula, kimi kula kul oldu Kim biliyor ilim ilen irfani Hamiyeti vicdani vatani Endamin guzel kesen doluysa Sensin herkeslerin beyi sultani

03-03-2009, 16:28	#424
gzkcy Forum Kalfası Kayıt Tarihi: Mar 2007 Üye numarası: #112559 Yer: ankara Mesaj sayısı: 1,316 Karma etkisi: 6532 Karma: 652719	Fundamentals of Quantum Chemistry, James E. House James E. House, "Fundamentals of Quantum Chemistry, Second Edition (Complementary Science)" Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 Academic Press \| 291 pages \| PDF An introduction to the principles of quantum mechanics needed in physical chemistry. Mathematical tools are presented and developed as needed and only basic calculus, chemistry, and physics is assumed. Applications include atomic and molecular structure, spectroscopy, alpha decay, tunneling, and superconductivity. New edition includes sections on perturbation theory, orbital symmetry of diatomic molecules, the Huckel MO method and Woodward/Hoffman rules as well as a new chapter on SCF and Hartree-Fock methods. This revised text clearly presents basic quantum mechanics for students in chemistry Separate sections treat needed mathematical techniques. Presents complete mathematical details of derivations. Contains applications of quantum mechanics to a broad range of problems in spectroscopy and molecular structure New in this Edition: A significant number of additional figures and improvements to existing figures New exercises, plus answers for selected problems Now includes the photoelectric effect, the perturbation treatment of the helium atom, orbital symmetry and chemical reactions, and molecular term symbols Careful and extensive edits throughout the text improve clarity and correct minor errors RAPID DOWNLOAD __________________ Dünyada her millet icraatına tahammül ettiği hükümetin mesuliyetine ortak sayılır. Mustafa Kemal ATATÜRK Asalet bir altin idi pul oldu, Turlu turlu bedenlere cul oldu, İmanin yolu keseden geceli, Kimi pula, kimi kula kul oldu Kim biliyor ilim ilen irfani Hamiyeti vicdani vatani Endamin guzel kesen doluysa Sensin herkeslerin beyi sultani

03-05-2009, 08:55	#425
gzkcy Forum Kalfası Kayıt Tarihi: Mar 2007 Üye numarası: #112559 Yer: ankara Mesaj sayısı: 1,316 Karma etkisi: 6532 Karma: 652719	Electrical and Electronic Principles and Technology By John Bird Electrical and Electronic Principles and Technology, Third Edition By John Bird * Publisher: Newnes * Number Of Pages: 432 * Publication Date: 2007-10-01 * ISBN-10 / ASIN: 0750685565 * ISBN-13 / EAN: 9780750685566 * Binding: Paperback Product Description: In this book John Bird introduces electrical principles and technology through examples rather than theory - enabling students to develop a sound understanding of the principles needed by technicians in fields such as electrical engineering, electronics and telecommunications. No previous background in engineering is assumed, making this an ideal text for vocational courses at Level 2 and 3, foundation degree and introductory courses for undergraduates. The book presents a logical topic progression rather than following the structure of a particular syllabus. However, the coverage of this new edition has been brought fully in line with the electrical and electronics units of the 2007 BTEC National specification. It is also designed to cover the requirements of the BTEC First specifications. New material in this third edition includes brand new chapters on semiconductor diodes and transistors as well as added sections on batteries, fuel cells and alternative and renewable energies, relative and absolute voltages, self and mutual inductance, and virtual test and measuring instruments. Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 Support material for tutors is available as a free download at SUPPORT MATERIAL SITE : * Instructor's manual with full solutions and suggested marking scheme for all 7 revision tests in the book * Solutions manual with worked solutions for about 400 of the further problems in the book * Electronic files for all illustrations in the book * New colour layout helps navigation and highlights key learning points, formulae and exercises * 400 worked problems and over 1,300 questions, all with answers * Fully up to date with the 2007 BTEC National specification * Free lecturer support material available via textbooks.elsevier.com MEDIAFIRE DOWNLOAD __________________ Dünyada her millet icraatına tahammül ettiği hükümetin mesuliyetine ortak sayılır. Mustafa Kemal ATATÜRK Asalet bir altin idi pul oldu, Turlu turlu bedenlere cul oldu, İmanin yolu keseden geceli, Kimi pula, kimi kula kul oldu Kim biliyor ilim ilen irfani Hamiyeti vicdani vatani Endamin guzel kesen doluysa Sensin herkeslerin beyi sultani

03-06-2009, 08:33	#426
gzkcy Forum Kalfası Kayıt Tarihi: Mar 2007 Üye numarası: #112559 Yer: ankara Mesaj sayısı: 1,316 Karma etkisi: 6532 Karma: 652719	Computational Science and Its Applications Computational Science and Its Applications - ICCSA 2008 - Part I Product Description The two-volume set LNCS 5072 and 5073 constitutes the refereed proceedings of the International Conference on Computational Science and Its Applications, ICCSA 2008, held in Perugia, Italy, in June/July, 2008. The two volumes contain papers presenting a wealth of original research results in the field of computational science, from foundational issues in computer science and mathematics to advanced applications in virtually all sciences making use of computational techniques. The topics of the fully refereed papers are structured according to the five major conference themes: computational methods, algorithms and scientific applications, high performance technical computing and networks, advanced and emerging applications, geometric modelling, graphics and visualization, as well as information systems and information technologies. Moreover, submissions from more than 20 workshops and technical sessions in the areas, such as embedded systems, geographical analysis, computational geometry, computational geomatics, computer graphics, virtual reality, computer modeling, computer algebra, mobile communications, wireless networks, computational forensics, data storage, information security, web learning, software engineering, computational intelligence, digital security, biometrics, molecular structures, material design, ubiquitous computing, symbolic computations, web systems and intelligence, and e-education contribute to this publication. Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 rapid part 1 rapid part 2 Computational Science and Its Applications - ICCSA 2008 - Part II Product Description The two-volume set LNCS 5072 and 5073 constitutes the refereed proceedings of the International Conference on Computational Science and Its Applications, ICCSA 2008, held in Perugia, Italy in June/July 2008. The two volumes contain papers presenting a wealth of original research results in the field of computational science, from foundational issues in computer science and mathematics to advanced applications in virtually all sciences making use of computational techniques. The topics of the refereed papers are structured according to the five major conference themes: computational methods, algorithms and applications, high performance technical computing and networks, advanced and emerging applications, geometric modelling, graphics and visualization, information systems and information technologies. rapid download password:netbks.com boşluğu imleçle geçiniz __________________ Dünyada her millet icraatına tahammül ettiği hükümetin mesuliyetine ortak sayılır. Mustafa Kemal ATATÜRK Asalet bir altin idi pul oldu, Turlu turlu bedenlere cul oldu, İmanin yolu keseden geceli, Kimi pula, kimi kula kul oldu Kim biliyor ilim ilen irfani Hamiyeti vicdani vatani Endamin guzel kesen doluysa Sensin herkeslerin beyi sultani

03-06-2009, 15:12	#427
mu_tu Cool Üye Kayıt Tarihi: Oct 2006 Üye numarası: #96663 Mesaj sayısı: 166 Karma etkisi: 58 Karma: 5448	hocam ellerine sağlık çok güzel çalışma olmuş __________________ *Kaçan Yorgun Ölür...*

03-11-2009, 08:42	#428
gzkcy Forum Kalfası Kayıt Tarihi: Mar 2007 Üye numarası: #112559 Yer: ankara Mesaj sayısı: 1,316 Karma etkisi: 6532 Karma: 652719	Environmental Pollution and Control, Fourth Edition Environmental Pollution and Control, Fourth Edition by J. Jeffrey Peirce, P Aarne Vesilind, Ruth Weiner, ISBN-10 / ASIN: 0750698993 ISBN-13 / EAN: 9780750698993 Publisher: Butterworth-Heinemann Number Of Pages: 392 Publication Date: 1997-11-11 Complex environmental problems are often reduced to an inappropriate level of simplicity. While this book does not seek to present a comprehensive scientific and technical coverage of all aspects of the subject matter, it makes the issues, ideas, and language of environmental engineering accessible and understandable to the nontechnical reader.Improvements introduced in the fourth edition include a complete rewrite of the chapters dealing with risk assessment and ethics, the introduction of new theories of radiation damage, inclusion of environmental disasters like Chernobyl and Bhopal, and general updating of all the content, specifically that on radioactive waste. Since this book was first published in 1972, several generations of students have become environmentally aware and conscious of their responsibilities to the planet earth. Many of these environmental pioneers are now teaching in colleges and universities, and have in their classes students with the same sense of dedication and resolve that they themselves brought to the discipline. In those days, it was sometimes difficult to explain what indeed environmental science or engineering was, and why the development of these fields was so important to the future of the earth and to human civilization. Today there is no question that the human species has the capability of destroying its collective home, and that we have indeed taken major steps toward doing exactly that.And yet, while, a lot has changed in a generation, much has not. We still have air pollution; we still contaminate our water supplies; we still dispose of hazardous materials improperly; we still destroy natural habitats as if no other species mattered. And worst of all, we still continue to populate the earth at an alarming rate. There is still a need for this book, and for the college and university courses that use it as a text, and perhaps this need is more acute now than it was several decades ago. Although the battle to preserve the environment is still raging, some of the rules have changed. We now must take into account risk to humans, and be able to manipulate concepts of risk management. With increasing population, and fewer alternatives to waste disposal, this problem is intensified. Environmental laws have changed, and will no doubt continue to evolve. Attitudes toward the environment are often couched in what has become known as the environmental ethic. Finally, the environmental movement has become powerful politically, and environmentalism can be made to serve a political agenda.In revising this book, we have attempted to incorporate the evolving nature of environmental sciences and engineering by adding chapters as necessary and eliminating material that is less germane to today's students. We have nevertheless maintained the essential feature of this book -- to package the more important aspects of environmental engineering science and technology in an organized manner and present this mainly technical material to a nonengineering audience.This book has been used as a text in courses which require no prerequisites, although a high school knowledge of chemistry is important. A knowledge of college level algebra is also useful, but calculus is not required for the understanding of the technical and scientific concepts.We do not intend for this book to be scientifically and technically complete. In fact, many complex environmental problems have been simplified to the threshold of pain for many engineers and scientists. Our objective, however, is not to impress nontechnical students with the rigors and complexities of pollution control technology but rather to make some of the language and ideas of environmental engineering and science more understandable.PAVJJPRFWAn introduction to the more important aspects of environmental science and technology.Well organized and suitable for both the technical and non-technical reader.Ideal for the student taking courses in this field who does not have an extensive engineering, mathematical, or environmental background. Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 mihd download __________________ Dünyada her millet icraatına tahammül ettiği hükümetin mesuliyetine ortak sayılır. Mustafa Kemal ATATÜRK Asalet bir altin idi pul oldu, Turlu turlu bedenlere cul oldu, İmanin yolu keseden geceli, Kimi pula, kimi kula kul oldu Kim biliyor ilim ilen irfani Hamiyeti vicdani vatani Endamin guzel kesen doluysa Sensin herkeslerin beyi sultani

03-12-2009, 09:20	#429
gzkcy Forum Kalfası Kayıt Tarihi: Mar 2007 Üye numarası: #112559 Yer: ankara Mesaj sayısı: 1,316 Karma etkisi: 6532 Karma: 652719	Numerical Methods for Engineers and Scientists, 2nd Edition Review a good, solid instructional text on the basic tools of numerical analysis. -AIAA Journal This text is designed for a junior-senior level elective course taken by a large number of engineering students from Mechanical, Civil and Electrical Engineering. The objective of the book is to introduce the engineer and scientist to numerical methods that can be used to solve the equations that govern physical processes. Product Details Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 * Hardcover: 840 pages * Publisher: CRC; 2 edition (May 31, 2001) * Language: English * ISBN-10: 0824704436 * ISBN-13: 978-0824704438 download uploading __________________ Dünyada her millet icraatına tahammül ettiği hükümetin mesuliyetine ortak sayılır. Mustafa Kemal ATATÜRK Asalet bir altin idi pul oldu, Turlu turlu bedenlere cul oldu, İmanin yolu keseden geceli, Kimi pula, kimi kula kul oldu Kim biliyor ilim ilen irfani Hamiyeti vicdani vatani Endamin guzel kesen doluysa Sensin herkeslerin beyi sultani

04-02-2009, 08:39	#430
gzkcy Forum Kalfası Kayıt Tarihi: Mar 2007 Üye numarası: #112559 Yer: ankara Mesaj sayısı: 1,316 Karma etkisi: 6532 Karma: 652719	Fundamentals of Thermodynamics and Applications Fundamentals of Thermodynamics and Applications: With Historical Annotations and Many Citations from Avogadro to Zermelo Product Description The book provides a systematic introduction into the fundamental ideas of thermodynamics at a somewhat advanced level. And it exhibits many applications of the theory in the fields of engineering, physics, chemistry, physical chemistry, and materials science. The universal equations of balance are strictly separated from the constitutive equations which characterize the behavior of material bodies, mostly gases, vapors, and liquids. Some selected solids like rubber, gels and shape memory alloys are considered as well. Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 Both authors have taught students of the subject for many years at the Technical University of Berlin, and they have actively participated in modern research in thermodynamics. Historical annotations offer some relaxing moments for the reader. rapid download Password: netbks.com __________________ Dünyada her millet icraatına tahammül ettiği hükümetin mesuliyetine ortak sayılır. Mustafa Kemal ATATÜRK Asalet bir altin idi pul oldu, Turlu turlu bedenlere cul oldu, İmanin yolu keseden geceli, Kimi pula, kimi kula kul oldu Kim biliyor ilim ilen irfani Hamiyeti vicdani vatani Endamin guzel kesen doluysa Sensin herkeslerin beyi sultani

04-10-2009, 13:58	#432
gzkcy Forum Kalfası Kayıt Tarihi: Mar 2007 Üye numarası: #112559 Yer: ankara Mesaj sayısı: 1,316 Karma etkisi: 6532 Karma: 652719	Design Sketching Design Sketching is an innovative new sketch technique book that has become a highly regarded resource for designers, students and Universities throughout the world. Rather than taking the traditional theoretical approach, it aims to teach and inspire by displaying a broad collection of sketches encompassing the entire design process. Twenty-four talented students from the Umeå Institute of Design, one of Europe’s best design schools, have contributed to the diverse material in the book. Work has been selected from the different areas of the Institute, resulting in a unique collection of sketches representing a large number of different product designs. We hope and believe that Design Sketching will help you to develop your sketching skills and serve as an invaluable tool for inspiration! rapid download __________________ Dünyada her millet icraatına tahammül ettiği hükümetin mesuliyetine ortak sayılır. Mustafa Kemal ATATÜRK Asalet bir altin idi pul oldu, Turlu turlu bedenlere cul oldu, İmanin yolu keseden geceli, Kimi pula, kimi kula kul oldu Kim biliyor ilim ilen irfani Hamiyeti vicdani vatani Endamin guzel kesen doluysa Sensin herkeslerin beyi sultani

04-29-2009, 17:06	#433
gzkcy Forum Kalfası Kayıt Tarihi: Mar 2007 Üye numarası: #112559 Yer: ankara Mesaj sayısı: 1,316 Karma etkisi: 6532 Karma: 652719	Mechanical and Materials Collection 2 CDs ISO \| 737.8 MB/744.MB \| 5% recovery This is book set CD1 ALCOCK, C. B. (2000). Thermochemical Processes - Principles and Models Thermochemical_Processes.pdf 2021046 ASHBY, M. F. (1998). Engineering Materials (2nd ed.) (2 vols.)/Volume 1 - An Introduction to their Properties and Applications Engineering_Materials_2E_VOLUME1.pdf 13852322 ASHBY, M. F. (1998). Engineering Materials (2nd ed.) (2 vols.)/Volume 2 - An Introduction to Microstructures, Processing and Design Engineering_Materials_2E_VOLUME2.pdf 12052918 ASHBY, M. F. (2000). Metal Foams - A Design Guide Metal_Foams.pdf 4331242 BACHUS, L. (2003). Know and Understand Centrifugal Pumps Know_and_Understand_Centrifugal_Pumps.pdf 8129200 BAI, Y. (2003). Marine Structural Design Marine_Structural_Design.pdf 14776644 BAKER, A. A. (2002). Advances in the Bonded Composite Repair of Metallic Aircraft Structure (2 vols.) Advances_Repair_Metallic_Aircraft_Structure_VOLUME 1.pdf 14745230 BAKER, A. A. (2002). Advances in the Bonded Composite Repair of Metallic Aircraft Structure (2 vols.) Advances_Repair_Metallic_Aircraft_Structure_VOLUME 2.pdf 15016258 BERTRAM, V. (2000). Practical Ship Hydrodynamics Practical_Ship_Hydrodynamics.pdf 2307142 BIRD, J. (2003). Engineering Mathematics (4th ed.) Engineering_Mathematics_4E.pdf 4949257 BLAZEK, J. (2001). Computational Fluid Dynamics - Principles and Applications BLAZEK_Computational_Fluid_Dynamics.pdf 12006916 BLOCH, H. P. (1990). Machinery Component Maintenance and Repair (2nd ed.) Machinery_Component_Maintenance_2E.pdf 14707675 BLOCH, H. P. (1996). Major Process Equipment Maintenance and Repair (2nd ed.) Practical_Machinery_Management_2E.pdf 20282256 BLOCH, H. P. (1998). Improving Machinery Reliability (3rd ed.) Improving_Machinery_Reliability_3E.pdf 20008299 BONNICK, A. W. M. (2001). Automotive Computer Controlled Systems - Diagnostic Tools and Techniques Automotive_Computer_Controlled_Systems.pdf 7054772 BOOKER, J. D. (2001). Designing Capable and Reliable Products Designing_Capable_and_Reliable_Products.pdf 18430414 BOYCE, M. P. (2001). Gas Turbine Engineering Handbook (2nd ed.) Gas_Turbine_Engineering_Handbook_2E.pdf 10845891 BRAMWELL, A. R. S. (2001). Bramwell's Helicopter Dynamics (2nd ed.) BRAMWELL_Helicopter_Dynamics_2E.pdf 5722593 BRANDES, E. A. (1992). Smithells Metals Reference Book (7th ed.) Smithells_Metals_Reference_Book_7E.rar 29964954 BRANDES, E. A. (1998). Smithells Light Metals Handbook Smithells_Light_Metals_Handbook.pdf 1850070 BROWN, J. R. (1999). Foseco Non-Ferrous Foundryman's Handbook (11th ed.) Foseco_Non-Ferrous_Foundryman's_Handbook_11E.pdf 8078126 BROWN, J. R. (2000). Foseco Ferrous Foundryman's Handbook Foseco_Ferrous_Foundryman's_Handbook.pdf 4353593 BRUNDLE, C. R. (1992). Encyclopedia of Materials Characterization - Surfaces, Interfaces, Thin Films Encyclopedia_of_Materials_Characterization.pdf 20452194 BRYDSON, J. A. (1999). Plastics Materials (7th ed.) Plastics_Materials_7E.pdf 50312959 BURCHELL, T. D. (1999). Carbon Materials for Advanced Technologies Carbon_Materials_for_Advanced_Technologies.pdf 14734488 BUTLER, D. (2000). Guide to Ship Repair Estimates - In Man-Hours Guide_to_Ship_Repair_Estimates.pdf 1063141 CAHN, R. W. (1996). Physical Metallurgy (4th ed.) (3 vols.) Physical_Metallurgy_4E_VOLUME1.rar 20107355 CAHN, R. W. (1996). Physical Metallurgy (4th ed.) (3 vols.) Physical_Metallurgy_4E_VOLUME2.rar 19030323 CAHN, R. W. (1996). Physical Metallurgy (4th ed.) (3 vols.) Physical_Metallurgy_4E_VOLUME3.rar 20635291 CAHN, R. W. (2001). The Coming of Materials Science The_Coming_of_Materials_Science.pdf 14712795 CAMPBELL, B. A. (1996). Introduction to Space Sciences and Spacecraft Applications Intro_to_Space_Sciences_Spacecraft_Applications.pd f 5837763 CAMPBELL, J. (2003). Castings - The New Metallurgy of Cast Metals (2nd ed.) Castings_2E.pdf 12156641 CARPINTERI, A. (2003). Biaxial-Multiaxial Fatigue and Fracture Biaxial_Multiaxial_Fatigue_and_Fracture.pdf 14766468 CARSON, P. (2002). Hazardous Chemicals Handbook (2nd ed.) Hazardous_Chemicals_Handbook_2E.pdf 2530016 CARVILL, J. (1993). Mechanical Engineer's Data Handbook Mechanical_Engineers_Data_Handbook.pdf 14979729 CHILDS, T. (2000). Metal Machining - Theory and Applications Metal_Machining.pdf 2975032 ~censored~, A. N. (2004). A Guide to the Collision Avoidance Rules (6th ed.) Collision_Avoidance_Rules_Guide_6E.pdf 4969171 CRAWFORD, R. J. (1998). Plastics Engineering (3rd ed.) Plastics_Engineering_3E.pdf 23049366 DERRETT, D. R. (1999). Ship Stability for Masters and Mates (5th ed.) Ship_Stability_for_Masters_and_Mates_5E.pdf 5976671 DIXON, S. L. (1998). Fluid Mechanics, Thermodynamics of Turbomachinery (4th ed.) Fluid_Mechanics_and_Thermodynamics_of_Turbomachine ry_4E.pdf 3367533 ELICES M. (2002). Fiber Fracture Fiber_Fracture.pdf 11396610 ENDO, M. (1996). Carbon Nanotubes Carbon_Nanotubes.pdf 8382525 EYRES, D. J. (2001). Ship Construction (5th ed.) Ship_Construction_5E.pdf 17982652 GARRETT, T. K. (2001). The Motor Vehicle (13th ed.) The_Motor_Vehicle_13E.pdf 19879099 HALEVI, G. (2001). Handbook of Production Management Methods Handbook_of_Production_Management_Methods.pdf 17105954 HEISLER, H. (2002). Advanced Vehicle Technology (2nd ed.) Advanced_Vehicle_Technology_2E.pdf 8760476 HODKINSON, R. (2001). Lightweight Electric Hybrid Vehicle Design Lightweight_Electric_Hybrid_Vehicle_Design.pdf 8878614 HORLOCK, J. H. (2003). Advanced Gas Turbine Cycles Advanced_Gas_Turbine_Cycles.pdf 5285134 HOUGHTON, E. L. (2002). Aerodynamics for Engineering Students (5th ed.) Aerodynamics_for_Engineering_Students_5E.pdf 16575685 HOUSE, D. J. (2001). Seamanship Techniques (2nd ed.) Seamanship_Techniques_2E.pdf 22475254 HOYLE, D. (2000). Automotive Quality Systems Handbook Automotive_Quality_Systems_Handbook.pdf 2948822 HOYLE, D. (2001). ISO 9000 Quality Systems Handbook (4th ed.) ISO_9000_Quality_Systems_Handbook_4E.pdf 3379509 HOYLE, D. (2003). ISO 9000_ 2000 - An A-Z Guide ISO_9000'2000_An_A-Z_Guide.pdf 1134100 HUDSON, J. A. (2000). Engineering Rock Mechanics (2 vols.)/Part 1 - An Introduction to the Principles Engineering_Rock_Mechanics_VOLUME1.pdf 12221480 HUDSON, J. A. (2000). Engineering Rock Mechanics (2 vols.)/Part 2 - Illustrative Worked Examples Engineering_Rock_Mechanics_VOLUME2.pdf 14811234 JENKINSON, L. R. (2003). Aircraft Design Projects for Engineering Students Aircraft_Design_Projects.pdf 2556382 JONES, D. R. H. (2001). Failure Analysis Case Studies II Failure_Analysis_Case_Studies_II.pdf 12783039 JUDD, S. (2003). Membranes for Industrial Wastewater Recovery and Re-Use Membranes_for_Industrial_Wastewater_Recovery.pdf 8829837 KIM, J.-K. (1998). Engineered Interfaces in Fiber Reinforced Composites Engineered_Interfaces_in_Fiber_Reinforced_Composit es.pdf 11007783 KING, R. P. (2002). Introduction to Practical Fluid Flow Intro_to_Practical_Fluid_Flow.pdf 4082998 Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 KUNDU, P. K. (2001). Fluid Mechanics (2nd ed.) KUNDU_Fluid_Mechanics_2E.pdf 29839448 CD 2 LAI, W. M. (1993). Introduction to Continuum Mechanics (3rd ed.) LESTER, A. (2003). Project Planning and Control (4th ed.) LIENGME, B. V. (2002). A Guide to Microsoft Excel 2002 for Scientists and Engineers (3rd ed.) Kaynak: Wardom http://www.wardom.org/showthread.php?t=130737 MARCINIAK, Z. (2002). Mechanics of Sheet Metal Forming (2nd ed.) MARGHITU, D. B. (2001). Mechanical Engineer's Handbook MATTHEWS, C. (2001). Aeronautical Engineer's Data Book MCFARLANE, B. (2002). Beginning AutoCAD 2002 MCFARLANE, B. (2002). Modelling with AutoCAD 2002 MCGEORGE, H. D. (1995). Marine Auxiliary Machinery (7th ed.) MEGSON, T. H. G. (1999). Aircraft Structures for Engineering Students (3rd ed.) MERCER, R. B. (2001). Industrial Control Wiring Guide (2nd ed.) MOBLEY, R. K. (1999). Root Cause Failure Analysis MOBLEY, R. K. (1999). Vibration Fundamentals MOBLEY, R. K. (2002). An Introduction to Predictive Maintenance (2nd ed.) MOBLEY, R. K. (2003). Plant Engineering Handbook MOMBER, A. W. (2002). Hydroblasting and Coating of Steel Structures MURAKAMI, Y. (2002). Metal Fatigue - Effects of Small Defects and Nonmetallic Inclusions NEALE, M. J. (1995). The Tribology Handbook (2nd ed.) OAKLAND, J. S. (2003). Statistical Process Control (5th ed.) OHRING, M. (1991). The Materials Science of Thin Films PACEJKA, H. B. (2002). Tyre Mechanics and Vehicle Dynamics PAIDOUSSIS, M. P. (1998). Fluid-Structure Interactions - Slender Structures and Axial Flow (vol. 1) POPE, J. E. (1996). Rules of Thumb for Mechanical Engineers RAWSON, K. J. (2001). Basic Ship Theory (5th ed.) (2 vols.) REIMPELL, J. (2001). The Automotive Chassis - Engineering Principles (2nd ed.) RIBBENS, W. B. (1997). Understanding Automotive Electronics (5th ed.) RIDLEY, J. (2002). Safety at Work (6th ed.) ROSATO, D. V. (2003). Plastics Engineered Product Design SANDLER, B.-Z. (1999). Robotics - Designing the Mechanisms for Automated Machinery (2nd ed.) SCHNEEKLUTH, H. (1998). Ship Design for Efficiency and Economy (2nd ed.) SIDERIS, M. (1998). Methods for Monitoring and Diagnosing the Efficiency of Catalytic Converters SMALLMAN, R. E. (1999). Modern Physical Metallurgy and Materials Engineering - Science, Process, Application SMITH, D. J. (2001). Reliability, Maintainability and Risk - Practical Methods for Engineers (6th ed.) SMITH, E. H. (1994). Mechanical Engineer's Reference Book (12th ed.) STACHOWIAK, G. W. (2000). Engineering Tribology (2nd ed.) STOLARSKI, T. A. (1990). Tribology in Machine Design TANAKA, K. (1999). The Science and Technology of Carbon Nanotubes TETLEY, L. (2001). Electronic Navigation Systems (3rd ed.) TONG, L. (2002). 3D Fibre Reinforced Polymer Composites TROTT, A. R. (2000). Refrigeration and Air-Conditioning (3rd ed.) TUPPER, E. C. (1996). Introduction to Naval Architecture (3rd ed.) VASILIEV, V. V. (2001). Mechanics and Analysis of Composite Materials WATSON, D. G. M. (1998). Practical Ship Design WILLMOTT, P. (2001). TPM - A Route to World-Class Performance WOODYARD, D. F. (2004). Pounder's Marine Diesel Engines and Gas Turbines (8th ed.) WU, Y.-S. (2001). Practical Design of Ships and Other Floating Structures (vol. 1) YASUDA, E. (2003). Carbon Alloys - Novel Concepts to Develop Carbon Science and Technology YUN, L. (2000). Theory and Design of Air Cushion Craft ZIENKIEWICZ, O. C. (2000). The Finite Element Method (5th ed.) (3 vols.) FILEFACTORY PART 1 FILEFACTORY PART 2 FILEFACTORY PART 3 FILEFACTORY PART 4 FILEFACTORY PART 5 FILEFACTORY PART 6 FILEFACTORY PART 7 FILEFACTORY PART 8 FILEFACTORY PART 9 FILEFACTORY PART 10 FILEFACTORY PART 11 FILEFACTORY PART 12 __________________ Dünyada her millet icraatına tahammül ettiği hükümetin mesuliyetine ortak sayılır. Mustafa Kemal ATATÜRK Asalet bir altin idi pul oldu, Turlu turlu bedenlere cul oldu, İmanin yolu keseden geceli, Kimi pula, kimi kula kul oldu Kim biliyor ilim ilen irfani Hamiyeti vicdani vatani Endamin guzel kesen doluysa Sensin herkeslerin beyi sultani Düzenleyen gzkcy : 01-05-2010 at 08:57. Sebep: düzenleme

05-12-2009, 20:37	#434
ılgarhan Çırak Kayıt Tarihi: Apr 2009 Üye numarası: #324945 Mesaj sayısı: 3 Karma etkisi: 0 Karma: 10	civil engineering e book collection linklerini yenileyebilir misiniz?

Konu Araçları	Bu Konuda Ara
Printer Çıktısını Göster Sayfayı Emaille Yolla	Bu Konuda Ara: Gelişmiş Arama
Konuya Oy Ver
Konuya Oy Ver: